Eaton Vickers PVM106 Hydraulic Pump
Eaton Vickers PVM106 Hydraulic Pump
Developed for higher-flow systems with variable-displacement control, the Eaton Vickers PVM106 is an open-circuit, variable-displacement axial piston pump with a geometric displacement of 106.5 cm³/rev. This pump offers 230 bar (3,300 psi) nominal pressure and 280 bar (4,000 psi), momentary peak pressure.
- Brand: Eaton Vickers / Vickers by Danfoss
- Series: PVM
- Model: PVM106
- Pump Type: Variable-displacement axial piston pump
- Circuit: Open circuit
- Geometric Displacement: 106.5 cm³/rev
- Nominal Pressure: 230 bar (3,300 psi)
- Peak Pressure: 280 bar (4,000 psi), momentary
- Maximum Speed: 1,800 rpm (quiet version)
- Maximum Flow: 187 L/min at 1,800 rpm
Share Product:
Eaton Vickers PVM106 Hydraulic Pump is used for providing flow of controlled quantity in an open-circuit hydraulic system. It has a variable displacement of the axial piston type with a geometric displacement of 106.5 cm³/rev. This volume enables the pump to supply large hydraulic requirements of the machinery while varying its flow according to the different operational stages of the equipment.
Eaton Vickers PVM106 Pump is rated to deliver nominal pressure up to 230 bar and peak pressure of up to 280 bar. It can work at a maximum speed of 1,800 rpm and delivers the flow rate of about 187 litres per minute at this speed. The approximate weight of the pump is 55 kg. Nevertheless, its actual flow rate and pressure depend on the viscosity of oil, its temperature, inlet conditions, loading and the chosen control configuration.
The PVM106 pump can have pressure compensating, load sensing and other controls, depending on the specific pump model code. These controls adjust the swashplate angle to change displacement depending on the hydraulic system demands. For instance, the pump may be able to produce more displacement whenever a cylinder or hydraulic motor needs to move. Subsequently, the pump reduces the displacement once the selected pressure level or lower flow is achieved. This feature may assist in conserving energy and preventing unnecessary oil heating.
PVM106 code is not able to determine all the characteristics of the installation. The model code contains all information regarding the control used, shaft type, mounting flange, port orientation, rotation direction and other features specific to a certain model. There are certain models that have a through-drive capability. Purchasers must ensure that the complete nameplate code matches the existing pump as two different looking pumps can fail to connect or function effectively in one particular system.
Rexton Hydraulic offers identification, supply and repair service for Eaton Vickers PVM106 hydraulic pumps. Our specialists will be able to analyze the model number and symptoms of operation in order to recommend an appropriate solution.
