Sandvik 55053116 Hydraulic Pump

Sandvik 55053116 Hydraulic Pump is a pump that is used in certain Sandvik and Tamrock surface drilling machines. It is included into the engine assembly of the machine and helps produce hydraulic flow needed for efficient drilling and functioning of the machine itself. This pump can be applied in hard working conditions typical for mining and drilling operations.

This pump is used in different Sandvik Ranger and DX machines such as DX680, Ranger 500 RP, Ranger 500-2, Ranger 600-2, Ranger 680 RP and Ranger 680-2. As there is one and the same number of this pump in many machines from this series, 55053116 is a good reference to find a spare pump. Nevertheless, it is necessary to check the model and serial numbers of the machine in order to be sure in the hydraulic system type.

For surface drilling machines, the operation of the hydraulic pumps will affect the response of the machine during its operations such as drilling. In case of any reduction in the efficiency of the pump, one can expect poor performance, slow hydraulic response, low pressures, noisy pump, among others. Some machines will perform well when cold but underperform after the heating up of the hydraulic oil due to increased internal leakage.

For the Sandvik 55053116 Hydraulic Pump Assembly to operate effectively, there is the need for clean hydraulic oil and correct pressure. Dirty hydraulic oil, clogged filters, limited suction flow rate or wrong system setting will result in higher wear and reduced lifetime of the pump. Due to this, it is important to conduct the inspection of the entire hydraulic system before fitting the new pump, particularly where the former was faulty due to overheating or contamination.
,
Rexton Hydraulic Services offers supply, repair and servicing of the Sandvik hydraulic pumps, these are used used in surface drill rigs and mining machinery as well as other hydraulic machines. We can help you with the Sandvik 55053116 pump when it comes to supplying, checking, repairing and replacing the corresponding hydraulic parts. Based on the condition of the pump, its components can be checked for possible wear before any repair or replacement.