Linde HMV-02 Variable Displacement Motor
Linde HMV-02 Variable Displacement Motor
Linde HMV-02 Motors are known for delivering the necessary torque even at low speeds, enabling a smooth and delicate start up. At Rexton, we provide repair, sales and maintenance services of Linde HMV-02 Variable Displacement Motor series along with their all models/ sizes.
- Series: HMV-02
- Variable Displacement Pumps For Open and Closed Circuit
- Model Sizes : HMV55, HMV75, HMV105, HMV135, HMV165, HMV210, HMV280, HMV105D, HMV165D.
- Nominal Pressure 450 bar
- Maximum Pressure 500 bar
Share Product:
Linde HPV-02 Variable Displacement Motor is an axial piston motor comes in 55 to 280 cc displacement size, know for excellent performance and longevity. These motors are commonly found uses in Drilling Machine, Crusher, Concrete Machine, Excavator, Dozer, Loader and other construction machineries.
At low speeds at startup, standard hydraulic motors are unable to produce the required torque. As a result, in order to get the rapid spinning hydraulic motors' power down to the required wheel speed, multiple step gearboxes must be used. In this environment, somewhat greater windage losses and lower mechanical efficiency are benevolently accepted.
The motors made by Linde Hydraulics, on the other hand, are quite the contrary: the Series Linde HPV-02 motors can transmit the necessary torque even at low speeds, enabling a smooth and responsive start up.
Characteristics
- Highly flexible compilation of individual configuration
- Extremely compact pump
- Cost-effective repair and conversions
Manufacturer Technical Documentation & Engineering Data
Download manufacturer technical brochures, dimensional drawings, operating manual sheets, and performance curves. For custom displacements, obsolete frame codes, or immediate technical assistance, connect with our engineering team.
General Engineering Parameters & Performance
| Engineering Parameter | Standard Specification | Standard / Unit |
|---|---|---|
| Operating Medium | Mineral oil-based hydraulic fluids (HLP, HVLP) to DIN 51524 | ISO VG 15 to 100 |
| Fluid Cleanliness Level | Class 20/18/15 or cleaner (recommended filtration β10 ≥ 100) | ISO 4406:1999 |
| Operating Temperature Range | -20°C to +90°C (FKM Viton seals rated to +115°C) | °C / °F |
| Fluid Viscosity Range | 16 to 36 mm²/s (Recommended optimal operating viscosity) | cSt / mm²/s |
| Mounting Flange & Shaft Options | SAE 2-Bolt, 4-Bolt, ISO & DIN standard metric splined / keyed shafts | SAE / ISO / DIN |
| Testing & Inspection Standard | 100% full-flow hydrostatic bench testing at rated working pressure | OEM Certified Quality |
Note: Precise performance curves, displacement options, control valves (LS, PC, remote pressure), and shaft rotations vary by exact model code. Contact our engineering team for exact fitment drawings.









