Eaton Vickers PVM141 Hydraulic Pump
Eaton Vickers PVM141 Hydraulic Pump
Rexton Hydraulic provides Eaton Vickers PVM141 hydraulic pump supply and repair support for large-capacity open-circuit hydraulic systems. The pump offers 230 bar (3,300 psi) nominal pressure and 280 bar (4,000 psi), momentary peak pressure.
- Brand: Eaton Vickers / Vickers by Danfoss
- Series: PVM
- Model: PVM141
- Pump Type: Variable-displacement axial piston pump
- Circuit: Open circuit
- Geometric Displacement: 141.0 cm³/rev
- Nominal Pressure: 230 bar (3,300 psi)
- Peak Pressure: 280 bar (4,000 psi), momentary
- Maximum Speed: 1,800 rpm (quiet version)
- Maximum Flow: 238 L/min at 1,800 rpm
Share Product:
Eaton Vickers PVM141 Hydraulic Pump offers significant variable flow for a larger-sized open hydraulic circuit. The axial piston type of design is used for this particular pump, which delivers a geometric displacement of 141 cm³ per one revolution. This displacement group is suitable for heavy-duty applications, which require a high hydraulic capacity for large cylinders, hydraulic motors, or many operations.
This pump provides a nominal pressure of up to 230 bar and peak pressure of up to 280 bar. The PVM141 Hydraulic Pump may operate at a maximum speed of 1,800 revolutions per minute. With this rate of rotation, the pump delivers about 238 liters of maximum flow per minute under specified catalogue conditions. This pump has a weight of about 66 kilograms. The real performance will depend on fluid viscosity, temperature, inlet pressure, control settings, and hydraulic circuit efficiency.
Eaton Vickers pump is capable of using controls such as pressure compensated, load sensing, among others depending on the particular type. The purpose of these controls is to control the swashplate position, thus varying the pump displacement based on demand. For instance, when the actuator makes a strenuous movement, the pump will be able to deliver high flows of oil. Afterward, the delivery of the pump will be reduced when the system attains the set pressure or a light cycle begins.
The Eaton Vickers PVM141 Hydraulic Pump can be used in large construction equipment, industrial equipment, presses, process systems, and high-output hydraulic power units. Before installing the pump, engineers need to determine the required flow, operating pressure, and drive power. Moreover, they must ensure that the reservoir, inlet, filters, and cooler are adequate to cater for the pump capacity since a poorly designed inlet may limit oil supply.
At Rexton Hydraulic, we offer identification, sourcing, and servicing for Eaton Vickers PVM141 hydraulic pumps. We can look at the model number, application, and condition to determine the best possible solution.
