Oilgear PFBA-2/2 Fixed Displacement Piston Pump

Oilgear PFBA-2/2 Fixed Displacement Piston Pump

At Rexton Hydraulic, we supply, support and service the Oilgear PFBA-2/2 Fixed Displacement Piston Pump range. We can help you pick the right one, get it installed, and make sure it runs smoothly and efficiently for years to come.
 

  • Series: PFBA Pump
  • Displacement  3.0 cc/rev – 18.5 cc/rev
  • Nominal Pressure 501 Bar
  • Maximum Pressure 1000 Bar
  • Maximum Speed 2000 RPM
  • Fixed Displacement Pump
  • Open Circuit Pump

Share Product:

Oilgear PFBA-2/2 Fixed Displacement Piston Pump is built to tackle hydraulic systems that handle extremely high pressure and deliver fluid with real precision, so you can be sure of reliable performance over the long haul. With a dead-set displacement of 4.5 cc/rev, this pump is all about consistency - providing a constant flow that's perfect for applications where accuracy and dependable hydraulic performance are a must.

It's part of Oilgears top-notch PFBA high-pressure pump family, and the PFBA-2/2 has got serious credentials - it can deliver up to 1000 bar of pressure on the continuous rating. That means this pump can handle its stuff in some really tough industrial environments. And it's perfect for applications that need to handle a lot of force - think forging presses, intensifier systems, heavy machinery and all sorts of high-pressure equipment.

The PFBA-2/2 has a stationary piston body design, which is a real plus because it eliminates all the centrifugal pressure that can wear out a pump's components - so you can expect to get a lot more life out of this pump. Plus, the hardened surfaces and robust design mean it can handle contaminants in the fluid a lot better than some of the older pump designs out there. And its compatible with low-viscosity and even water-based hydraulic fluids too, so it can handle any special hydraulic fluids your system might need.

Performance-wise, the PFBA-2/2 has got it where it counts - it delivers a steady flow at a range of operating speeds, and at 1800 RPM under rated pressure its churning out around 1.96 gpm (that's 7.4 l/min if you're using metric). That's what you need in a system where precision, pressure consistency and fast response times are key.

The PFBA-2/2 pump is also super compact - easy to install in tight spaces without taking up too much room. Plus, with its fixed displacement design, you get a system that's super easy to control and much more reliable, especially when you need the flow to stay constant no matter how fast or slow the speed or load is changing.

Technical Specifications

PVG FAMILY SPECIFICATIONS

FRAME SIZE MODEL B-FRAME C-FRAME D-FRAME
PVG-048 PVG-065 PVG-075 PVG-100 PVG-130 PVG-150 PVG-180
DRIVE Maximum (RPM) 2700 2700 2700 2400 2400 2400 2400
Minimum (RPM) 600 600 600 600 600 600 600
Torque to turn shaft (ft. lbs.) 9 9 9 24 24 40 50
Rotational Moment of Inertia (lbs.-in2) 21 21 21 50 47 150 152
OUTPUT1 Pressure (PSIA) Peak 5800 5800 4250 5800 4250 5800 5800
Continuous 5000 5000 3750 5000 3750 5000 5000
Minimum 100 100 100 100 100 100 100
Nominal Volume (GPM) at 1800 RPM and Rated Pressure For Full Displacement 21.1 28.8 33.3 42.4 57.6 63.0 78.0
CASE2 Maximum Pressure (PSI) w/ Standard Shaft Seal 25 25 25 25 25 25 25
Minimum Drain Line Hose Size #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE
CONTROLS3 Minimum Pressure (PSI) Pressure Controls – Minimum Compensator Setting 200 200 200 200 200 250 250
Volume Controls (VS, VM) – Minimum Pilot Pressure 500 500 500 500 500 500 800
Maximum Pilot Pressure (PSI) Volume Control – VS 600 600 600 600 600 600 N/A
Volume Control – VM 1000 1000 1000 1000 1000 1000 1000
Stroking Rate (MSEC) at Rated Pressure, Pressure Controls (Minimum) On Stroke 40 40 40 40 40 45 45
Off Stroke 50 50 50 50 50 60 60
Volume Controls (VS, VM) On Stroke 250 250 250 250 250 250 250
Off Stroke 250 250 250 250 250 250 250
FLUID4 Viscosity (SSU) Minimum 65 65 65 65 65 65 65
Maximum 2000 2000 2000 2000 2000 2000 2000
TEMPERATURE5 Fluid Operating Range (F˜) 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190
Fluid Minimum Starting (F˜) -40 -40 -40 -40 -40 -40 -40
Fluid Maximum at Case Drain Port (F˜) 230 230 230 230 230 230 230

Product Models