Oilgear PVV-250 Variable Displacement Axial Piston Pump

Oilgear PVV-250 Variable Displacement Axial Piston Pump

Rexton Hydraulic covers the PVV-250 full service: sales, spec support, installation guidance, maintenance and repair throughout the life of the pump. We help you choose the right control version, keep the system clean and set up correctly and monitor performance so your hydraulic system runs at maximum uptime and reliability.
 

  • Series: PVV Pump
  • Displacement  200.0 cc/rev – 540.0 cc/rev
  • Nominal Pressure 301 Bar
  • Maximum Pressure 501 Bar
  • Maximum Speed 2000 RPM
  • High-Pressure Pump
  • Open Circuit Pump

Share Product:

Oilgear PVV-250 Variable Displacement Axial Piston Pump can handle heavy flows, high pressures and long duty cycles. With a maximum displacement of 250 cc/rev, this pump is designed for large industrial and mobile applications where high flow and high pressure are key. It’s an open-loop circuit pump built for durability, precision and high performance.

This is rated for continuous pressure up to around 345 bar (5,000 psi) and peak pressure up to 400 bar (5,800 psi), the PVV-250 can handle tough hydraulic jobs. Depending on RPM, the rated flow at full displacement is approximately 59 gpm (~223 l/min) at 1,000 RPM, 72 gpm (~273 l/min) at 1,200 RPM and about 109 gpm (~413 l/min) at 1,800 RPM. This high flow capability is for heavy duty equipment like large presses, mining systems, material-handling installations and large hydraulic power units.

Oilgear pumps are engineered with long life and high performance in mind. The cylinder barrel is supported by hydrodynamic bearings which reduce internal wear and friction under heavy loads. The rotating group has hardened contact surfaces (“hard-on-hard” design) which resist contamination and allow reliable operation with low viscosity fluids. These features reduce downtime, extend maintenance intervals and deliver high performance in harsh environments.

The control response is another notable feature. The PVV-250 has sophisticated displacement control which allows smooth and rapid output changes to system demands. This makes it a good fit for applications where hydraulic loads change quickly or where high precision is required, like material handling, large mobile fleets or industrial test rigs.

Although this is a high capacity pump, the frame size is relatively compact for its performance class. Engineers can choose from multiple shaft configurations, rotation directions and porting options (top, bottom or rear). This flexibility makes it easy to integrate the pump into new systems or retrofit into existing hydraulic setups.

Technical Specifications

PVG FAMILY SPECIFICATIONS

FRAME SIZE MODEL B-FRAME C-FRAME D-FRAME
PVG-048 PVG-065 PVG-075 PVG-100 PVG-130 PVG-150 PVG-180
DRIVE Maximum (RPM) 2700 2700 2700 2400 2400 2400 2400
Minimum (RPM) 600 600 600 600 600 600 600
Torque to turn shaft (ft. lbs.) 9 9 9 24 24 40 50
Rotational Moment of Inertia (lbs.-in2) 21 21 21 50 47 150 152
OUTPUT1 Pressure (PSIA) Peak 5800 5800 4250 5800 4250 5800 5800
Continuous 5000 5000 3750 5000 3750 5000 5000
Minimum 100 100 100 100 100 100 100
Nominal Volume (GPM) at 1800 RPM and Rated Pressure For Full Displacement 21.1 28.8 33.3 42.4 57.6 63.0 78.0
CASE2 Maximum Pressure (PSI) w/ Standard Shaft Seal 25 25 25 25 25 25 25
Minimum Drain Line Hose Size #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE #16 SAE
CONTROLS3 Minimum Pressure (PSI) Pressure Controls – Minimum Compensator Setting 200 200 200 200 200 250 250
Volume Controls (VS, VM) – Minimum Pilot Pressure 500 500 500 500 500 500 800
Maximum Pilot Pressure (PSI) Volume Control – VS 600 600 600 600 600 600 N/A
Volume Control – VM 1000 1000 1000 1000 1000 1000 1000
Stroking Rate (MSEC) at Rated Pressure, Pressure Controls (Minimum) On Stroke 40 40 40 40 40 45 45
Off Stroke 50 50 50 50 50 60 60
Volume Controls (VS, VM) On Stroke 250 250 250 250 250 250 250
Off Stroke 250 250 250 250 250 250 250
FLUID4 Viscosity (SSU) Minimum 65 65 65 65 65 65 65
Maximum 2000 2000 2000 2000 2000 2000 2000
TEMPERATURE5 Fluid Operating Range (F˜) 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190 14 to 190
Fluid Minimum Starting (F˜) -40 -40 -40 -40 -40 -40 -40
Fluid Maximum at Case Drain Port (F˜) 230 230 230 230 230 230 230

Product Models